Wheel spacers 5×114,3 – 30mm CB71.6 Jeep KJ KK ZJ XJ 4pcs

Wheel spacers with a thickness of 35mm, featuring a 6×139.7mm bolt pattern and a 71,6mm center bore. These spacers are meticulously crafted from anodized aluminum 6061 in the T6 state, providing significantly improved strength characteristics compared to the commonly used PA21 alloy spacers. They come with hardened steel studs featuring an M12x1.5 thread.Price includes a set of 4 spacers.
Wheel spacers 5×114.3
thickness 30mm
CB 71,6
Material: Alloy 6061 / T6
Bolts: 1/2-20
Fits for:

Jeep Grand Cherokee
ZJ

Jeep Grand Cherokee
XJ

Jeep Liberty / Cherokee
I KJ

Jeep Cherokee
III KJ

Jeep Cherokee
IV KK

Jeep Wrangler
YJ

Jeep Wrangler
TJ

Proper installation is to be performed by a trained professional with sufficient knowledge of these products. The following points are guidelines only:1)    A torque wrench (no air tools) is required for the safe and proper installation of your new wheel spacers or adapters Be sure to remove all corrosion from your vehicle’s hub and rotor using sandpaper, a wire brush or a wire wheel to ensure correct centering and seating of the spacer.2)    Make sure that the spacer or adapter seats completely flush against the hub of the vehicle and that the wheel seats completely flush against the face of the spacer.3)    Make sure that the wheel spacers or adapters have studs with a thread pitch that matches your vehicle’s studs If they do not, additional lug nuts will be required4)    Your vehicle’s OEM wheel studs may be longer than the spacer is thick. If that is the case, there are a couple of options:-    Your factory wheel studs can be cut/trimmed down or replaced with longer studs-    Your wheels may have pockets or cavities between the mounting holes. If these pockets are of sufficient size and shape to accommodate your vehicle’s studs, you may not have the modify the studs5)    Never install wheels onto spacers if the vehicle’s factory studs make contact with the back of the wheel. Make sure to confirm that the back of the wheel seats completely flush against the face of the spacer