Lift kit 2 inches for Suzuki Grand Vitara + Camber bolts

Suspension Lift Kit 2” for Suzuki Grand Vitara I and Suzuki Grand Vitara XL7
The kit improves the approach, departure, and breakover angles, allowing for the installation of larger tires (235/70) without compromising vehicle handling on paved roads. After installing this lift, the vehicle performs significantly better when tackling larger off-road obstacles. The installation of the kit does not alter the suspension’s working characteristics, meaning there is no noticeable change in stiffness or softness of the suspension.
An additional advantage of our kits is that when the shock absorbers or springs wear out and need replacement, there is no need to purchase expensive lift-specific components. Our kits are designed to always work with standard shock absorbers and springs, which offer a much wider selection, significantly lower prices, and, most importantly, better availability.
Installation process:

Install rubber spacers on the springs (lower spacers on the front axle, higher ones on the rear axle).
Install front shock spacers (between the upper shock mount and the vehicle body).
Mount a front shock absorber strut brace (in the engine compartment) using six spacer sleeves.
Install rear shock spacers (between the lower shock mount and the axle).

After installing the lift kit, measure and, if necessary, adjust the suspension geometry. The front wheel camber angle can be adjusted using the eccentric bolts included in the kit.
The kit fits all body and engine versions.
Contents of the set:

Eccentric bolts

Complete set

Mounting bolts

Front strut spacers for shock absorbers

Shock absorber spacers

Installation instructions in POL/ENG/DEU attached

Index: LSGV1-1A