1026€
The main advantages of using differential locks include:
Increased traction: Differential locks enable better utilization of driving power by evenly distributing force to the wheels, allowing for improved traction on difficult terrain.
Enhanced control: By being able to lock the differential mechanism, the driver gains greater control over the vehicle, which is particularly important in extreme terrain conditions and improves passenger safety.
Component protection: By improving traction and control, differential locks can also contribute to reducing the wear of other drivetrain components, leading to increased durability and long-term savings.
Regardless of the terrain vehicle model, our differential locks are designed for maximum effectiveness and durability, proving themselves in rally conditions where reliability is crucial. This ensures reliability and durability for our customers even in the toughest terrain conditions. Our company places great emphasis on research and development to provide our customers with products that meet the highest quality and technological standards.
100% Electric Differential Lock with Torsen Mechanism – Replacement for Differential RD208.When the lock is disengaged, the Torsen mechanism operates to help increase traction. When the lock is engaged, it provides full locking of the differential and axles together with 100% drive.
Suitable for use on both front and rear axles.
It does not require additional air compressor.
Fits for:
Suzuki Jimny – rear axle with 10 bolts,
Suzuki Vitara – front axle,
Suzuki Grand Vitara – front axle,
Suzuki Samurai – rear axle
Suzuki Samurai – front axle with driveshaft for 26 splines.
Specification
Axle Spline
26 tooth, Ø27.4mm [1.08”]
Ratio Supported
All
Ring Gear ID
108.0mm [4.25”]
Ring Gear Bolts
10 bolts on Ø130mm [5.12”]
Recommended oil for differential locks:
75W90 in moderate climate zones
85W140 for lockers used in hot climates
80W90 for lockers used in cold climates
The first oil change should be performed after 1,500 km.
Subsequent oil changes should be carried out every 20,000 km, or more frequently if the vehicle operates in harsh conditions or if there is a risk of water entering the drive axles.
Index: ETS208FR
Show more
